To build a 5-sided shed, you’ll need a detailed plan that covers its design, materials, and construction steps. Here’s a general plan to get you started:
1. Design and Dimensions
- Shape: A pentagonal (5-sided) shed.
- Size: Determine the desired dimensions for each side. For example, each side could be 8 feet long, with a height of 7-8 feet.
- Roof: Plan for a roof with 5 triangular sections that meet at a central point. You may choose between a flat, gabled, or hip roof, depending on your design preference.
2. Materials Required
- Foundation: Gravel, concrete blocks, or pressure-treated wood beams.
- Framing: Pressure-treated 2×4 or 2×6 lumber for walls, roof, and floor joists.
- Flooring: Plywood or OSB sheets for the subfloor.
- Roofing: Plywood or OSB for roof decking, plus shingles or metal sheets for the exterior.
- Siding: Vinyl, wood, or metal panels for shed walls.
- Doors and Windows: Pre-fabricated shed door and optional windows.
- Hardware: Nails, screws, metal brackets, and roofing nails.
3. Tools Needed
- Tape measure, hammer, circular saw, drill, level, square, ladder, and protective gear.
4. Construction Steps
Step 1: Build the Foundation
- Clear the site of debris and level the ground.
- Lay a gravel base or use concrete blocks or treated wood beams for the foundation.
- Ensure the foundation is level and square.
Step 2: Construct the Floor Frame
- Cut and assemble the floor joists using 2×6 lumber, ensuring they fit within the shed’s pentagonal footprint.
- Attach plywood or OSB sheets to the floor joists to create a sturdy base.
Step 3: Build the Wall Frames
- Cut the wall studs and top/bottom plates to the required lengths.
- Assemble the wall frames on the ground, incorporating spaces for doors and windows.
- Erect the walls one by one, securing them to the floor and each other using metal brackets and screws.
Step 4: Construct the Roof Frame
- Measure and cut rafters to form the five triangular roof sections.
- Assemble the roof frame on the ground and lift it onto the wall frames.
- Secure the roof frame to the walls with metal brackets or hurricane ties.
Step 5: Install Roof Decking and Covering
- Attach plywood or OSB sheets to the roof frame to create a solid decking.
- Install shingles or metal sheets, ensuring they overlap correctly to prevent leaks.
Step 6: Install Siding, Doors, and Windows
- Attach siding panels to the exterior walls, starting from the bottom and working up.
- Install the shed door and any windows according to the manufacturer’s instructions.
- Apply any desired trim around doors, windows, and roof edges for a finished look.
5. Finishing Touches
- Paint or stain the shed for weather protection.
- Install gutters and downspouts if needed.
- Add any desired interior shelving or storage.
plans for 5 sided shed
Free plans for sheds, a list of free shed plans as well as buy and build plans.
